Effect of Sodium Fluoride and Aluminum Sulfate Salts on PVA Polymer Film Synthesized Using Casting Technology
DOI:
https://doi.org/10.26554/ijmr.20264178Keywords:
Polymers, PVA, Sodium Fluoride, Aluminum Sulfate, Casting MethodAbstract
Polymer films were manufactured from polyvinyl alcohol (PVA) doped with a concentration of sodium fluoride (NaF) and aluminum sulfate (Al2(SO4)3) salts via the solution casting method. The differences in crystallinity and transformation temperatures of solid polymer electrolyte sheets were analyzed using differential scanning calorimetry (DSC). The formation of a complex structure between PVA polymer and a salt were confirmed using Fourier transform infrared spectroscopy (FTIR). Absorption spectra were obtained in the wavelength range of 200–1200 nm and analyzed using the absorption equation for amorphous materials. The energy gap values showed a clear dependence on the concentration of sodium fluoride and aluminum sulfate. The indirect energy gap was determined and analyzed in relation to the integration of charge-transfer complexes within the grafted materials.
References
Abdel-Hameed, M. (2012). Polysulfone/Polyvinyl Alcohol Thin Film Nano-Composite Membranes: Synthesis, Characterization and Application for Desalination of Saline Groundwater. Journal of Applied Sciences Research, 8(7); 3811–3822
Abdullah, S. S., F. L. Ahmed, and S. K. Jasim (2025a). Structural and Optical Studies on Silver Nitrate Doped Polymer Blend and Effect on Some Pathogenic Bacteria. Revista Mexicana de Física, 71; 041004
Abdullah, S. S., S. K. Jasim, and A. H. Ghazi (2025b). Study the Effect of DBD Plasma on the Mechanical Properties of Polymer PMMA/HA. Indonesian Journal of Material Research, 3(2); 41–46
Ahmed, A. H., A. S. Jasim, and S. K. Jasim (2024a). Silver Oxide Nanoparticles Prepared by Pulsed Laser Ablation in Liquid and Their Study Physical Properties. Web of Semantics: Journal of Interdisciplinary Science, 2(2); 1–9
Ahmed, A. H., A. S. Jasim, and S. K. Jasim (2024b). Synthesis of Gold Nanoparticles by Pulsed Laser Ablation and Its Study Physical and Mechanical Properties. International Journal of Nanoelectronics and Materials, 17(4); 634–641
Anis, S. F., R. Hashaikeh, and N. Hilal (2019). Flux and Salt Rejection Enhancement of Polyvinyl (Alcohol) Reverse Osmosis Membranes Using Nano-Zeolite. Desalination, 470; 114104
Bercea, M. (2024). Recent Advances in Poly(Vinyl Alcohol)-Based Hydrogels. Polymers, 16; 2021
Chandra Mouli, R. M., W. S. K. Abudaqqa, and M. Fowler (2024). Advances in Polyvinyl Alcohol-Based Membranes for Fuel Cells: A Comprehensive Review on Types, Synthesis, Modifications, and Performance Optimization. Polymers, 16; 1775
Dennis, J. O., M. F. Shukur, O. A. Aldaghri, K. H. Ibnaouf, A. A. Adam, F. Usman, Y. M. Hassan, A. Alsadig, W. L. Danbature, and B. A. Abdulkadir (2023). A Review of Current Trends on Polyvinyl Alcohol (PVA)-Based Solid Polymer Electrolytes. Molecules, 28; 1781
Elashamwi, I. S., E. M. Abdelrazek, and A. Y. Yassin (2014). Influence of NiCl2/CdCl2 as Mixed Filler on Structural, Thermal and Electrical Properties of PVA/PVP Blend. British Journal of Applied Science & Technology, 4(30); 4263–4279
Guirguis, O. W. and M. T. H. Moselhey (2012). Thermal and Structural Studies of Polyvinyl Alcohol and Hydroxypropyl Cellulose Blends. Natural Science, 4(1); 57–67
Hemalatha, K. S., N. Parvatikar, and K. Rukmani (2014). Influence of ZnO Nanoparticles on Thermal Behavior of Polyvinyl Alcohol Films. International Journal of Advanced Science and Technology Research, 5; 106–115
Huo, W., B. Liang, X. Wu, Z. Zhang, W. Zhou, H. Wang, X. Ran, Y. Bai, and R. Zheng (2025). Prediction and Interpretability Study of the Glass Transition Temperature of Polyimide Based on Machine Learning and Molecular Dynamics Simulations. Polymers, 17; 2083
Hussein, J. M., S. K. Jasim, T. F. Abdullah, and A. S. Jasim (2024). Study and Characterization of ZnO Nanoparticles Prepared by Switched Laser Nd:YAG. Indonesian Journal of Material Research, 2(3); 73–78
Irfan, M., A. Manjunath, and S. S. Mahesh (2020). Study on the Optical Properties of Polyvinyl Alcohol Doped Sodium Fluoride Polymer Electrolyte Films. In AIP Conference Proceedings, volume 2220. AIP Publishing, page 080063
Ismail, R. K., S. M. Abd Al Hussan, and S. K. Jasim (2025). Advances in Biosynthesis of Nanoparticles: A Review. Indonesian Journal of Material Research, 3(2); 31–40
Jasim, A. S., S. K. Jasim, and A. A. Habeeb (2021). Synthesis of Cinnamon Nanoparticles by Using Laser Ablation Technique. Iraqi Journal of Physics, 19(49); 7–14
Jasim, S. K. (2025). Effect of Cinnamon Nano/Micro Particles at Antibacterial Activity. Journal of Physical Science, 36(3); 43–53
Jasim, S. K., S. M. Abd Al Hussan, and M. T. Abd (2025). Improving the Mechanical Properties of Dental Fillings by Adding TiO2 NPs Prepared Laser Ablation. BioNanoScience, 15(3); 330
Jasim, S. K., S. M. Abd Al Hussan, A. S. Noori, and A. A. Habeeb (2024a). Determine Surface Plasmon Resonance and Effect Parameters Laser Ablation on Cu and Zn Nanoparticles. In AIP Conference Proceedings, volume 3219. AIP Publishing
Jasim, S. K., A. M. Shano, and S. K. Adnan (2024b). Zinc Oxide Poly Crystals Heterojunction and Infrared-Blind UVPhotodetector. Unspecified Journal, 3216; 060008
Luo, Y., X. Jiang, W. Zhang, and X. Li (2015). Effect of Aluminium Nitrate Hydrate on the Crystalline, Thermal and Mechanical Properties of Poly(Vinyl Alcohol) Film. Polymer Composites, 23; 555–562
Madhuranthakam, C. M. R., W. S. K. Abudaqqa, and M. Fowler (2024). Advances in Polyvinyl Alcohol-Based Membranes for Fuel Cells: A Comprehensive Review on Types, Synthesis, Modifications, and Performance Optimization. Polymers, 16(13); 1775
Miao, C., L. Reid, and W. Y. Hamad (2021). Moisture-Tunable, Ionic Strength-Controlled Piezoelectric Effect in Cellulose Nanocrystal Films. Applied Materials Today, 24; 101082
Mudigoudra, B. S., P. S. Masti, and R. B. Chougale (2012). Thermal Behavior of Polyvinyl Alcohol/Polyvinyl Pyrrolidone/Chitosan Ternary Polymer Blend Films. Research Journal of Recent Sciences, 1(9); 83–86
Pu-You, J., B. Cai-Ying, H. Li-Hong, and Z. Yong-Hong (2014). Properties of Poly(Vinyl Alcohol) Plasticized by Glycerin. Journal of Forest Products & Industries, 3(3); 151–153
Rabee, B. H., M. A. Habeeb, A. Hashim, and R. Mizher (2012). Preparation of (PVA–AlCl3·6H2O) Composites and Study Optical Properties. American Journal of Scientific Research, (71); 5–8
Risodkar, R. (2023). TGA–DTA Study of PVA Based Solid Polymer Complexes. International Journal of Scientific Research in Science and Technology, 10(13); 2395–6011
Sabri, T. Y., S. K. Jasim, A. A. Habeeb, and A. S. Jasim (2024). Preparation and Study Ag Nanoparticles via PLAL Technique: Influence of Different Number of Pulses. International Journal of Nanoelectronics and Materials, 17(1); 45–51
Salman, S. A., N. A. Bakr, and S. S. Abduallah (2019). Study of Thermal Decomposition and FTIR for PVA–AlCl Composite Films. Journal of Engineering and Applied Sciences, 14(3); 717–724
Salman, S. A., A. A. Kamil, and M. A. R. Iesa (2016). Preparation and Study of Some Optical Properties of (PVA–FeCl3) Composite Films. Journal of Chemical, Biological and Physical Sciences, 6(4); 1270–1280
Swaminathan, A., R. Ravi, M. Sasikumar, M. Dasaiah, G. Hirankumar, and S. Ayyasamy (2020). Preparation and Characterization of PVA/PAM/NH4SCN Polymer Film by Ultrasound-Assisted Solution Casting Method for Application in Electric Double Layer Capacitor. Ionics, 26(8); 4113–4128
Verma, C. and M. A. Quraishi (2022). Polyvinyl Alcohol (PVA) as a Biodegradable Polymeric Anticorrosive Material: A Review on Present Advancements and Future Directions. Corrosion Engineering, Science and Technology, 57(8); 796–812
Žigon, J., M. Petrič, I. Poljanšek, P. Oven, and U. Osolnik (2025). Application and Characterization of Poly(Vinyl Alcohol) Reinforced with Cellulose Nanofibrils as a Coating for Wood. Cellulose, 32; 6229–6252
